Description:
| Picture | Name | Good for&function | Details |
|---|---|---|---|
 |
TWO FLUTE SPIRAL SPOLE FLAT BALL NOSE | Good for: Fine three-dimensional relief on Acrylic, PVC, MDF, Hardwood, Aluminum and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
TWO FLUTE SPIRAL SLOPE FLAT BITS | Good for: Fine three-dimensional relief on Acrylic, PVC, MDF, Hardwood, Aluminum and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
ONE FLUTE SPIRAL SLOPE FLAT BITS | Good for: Fine three-dimensional relief on Acrylic, PVC, MDF, Hardwood, Aluminum and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
UP&DOWN CUT ONE FLUTE SPIRAL BITS | Good for: PVC, Lotus board,Soft wood,and All kinds of Composite board. | Φ3.175,Φ4,Φ6,Φ10 |
 |
ONE FLUTE SPIRAL BITS FOR ACRYLIC | Good for: special for Acrylic,High surface finish,undergraduate degree scraping. | Φ3.175,Φ4,Φ6,Φ10 |
 |
CUP CUT WITH CHIP-BREAKER SPIRAL BITS | Good for: Rough milling processing on Flake board, MDF, Plywood, Aluminum. | Φ3.175,Φ4,Φ6,Φ10 |
 |
SINGLE FLUTE LONG SPIRAL BITS | Good for: Foam board, Low MDF and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
CORN TEETH END MILLS | Good for: Printed circuit board, High density fiber board (HDF), Hard wood, Carbon fiber, Fiber glass, HDF composite board. | Φ3.175,Φ4,Φ6,Φ10 |
 |
TWO FLUTES LONG SPIRAL BITS | Good for: Solid wood,Hard wood,Composite board and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
UP&DOWN CUT THREE FLUTES SPIRAL BITS | Good for: MDF, PVC, Board with lagging, log. | Φ3.175,Φ4,Φ6,Φ10 |
 |
FOUR FLUTES SPIRAL BITS | Good for: Acrylic, High MDF, Hardwood. | Φ3.175,Φ4,Φ6,Φ10 |
 |
DOWN CUT THREE FLUTES SPIRAL BITS | Good for: MDF, Multilayer board, Plywood,Solid wood,Composite wood and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
THREE FLUTES SPIRAL BITS | Good for: Acrylic, High MDF, Hardwood, Die steel. | Φ3.175,Φ4,Φ6,Φ10 |
 |
LONG CEL DOUBLE STRAIGHT FLUTES BITS | Good for: Multilayer board, Plywood, MDF, Foam. | Φ3.175,Φ4,Φ6,Φ10 |
 |
DOUBLE STRAIGHT FLUTE BITS | Good for: Multilayer board, Plywood, MDF, Foam. | Φ3.175,Φ4,Φ6,Φ10 |
 |
TWO FLUTES SPIRAL BITS | Good for: Acrylic, PVC, MDF. | Φ3.175,Φ4,Φ6,Φ10 |
 |
ONE FLUTE LARGE SPIRAL BITS | Good for: Low or Middle MDF, PVC, Acrylic and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
ONE FLUTE SPIRAL BITS FOR SOLID WOOD | Good for:Solid wood,MDF,Multilayer board and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
ONE FLUTE SPIRAL BITS | Good for: Acrylic, MDF,PVC, Lotus board,Plastic,Wood,Composite board and so on. | Φ3.175,Φ4,Φ6,Φ10 |
| Picture | Name | Good for&function | Details |
|---|---|---|---|
 |
ONE FLUTE SPIRAL BITS FOR ALIMINUM | Good for: Low power spindle, high speed rotation above 15000 per minute processing. | Φ3.175,Φ4,Φ6,Φ10 |
 |
DOWN CUT ONE FLUTE SPIRAL BITS | Good for: MDF, Plywood, Soft wood, PVC and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
DOUBLE LARGE FLUTES SPIRAL BITS FOR MDF | Good for: Low or Middle MDF, PVC, Acrylic and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
DOUBLE FLUTES SPIRAL WITHOUT LIGAMENT BITS | Good for: Acrylic, PVC, MDF. | Φ3.175,Φ4,Φ6,Φ10 |
 |
HALF STRAIGHT BITS | Good for:Two-color plate,ABS,Acrylic cutting and engraving | Φ3.175,Φ4,Φ6,Φ10 |
 |
ONE FLUTE SPIRAL BITS FOR STAINLESS STEEL | Good for:.Iron sheet,Galvanized sheet,Stainless stell sheet and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
ONE FLUTE SPIRAL BITS FOR PURE ALIMINUM | Good for: Low power spindle, high speed rotation above 15000 per minute processing. | Φ3.175,Φ4,Φ6,Φ10 |
 |
UP CUT WITH THICK TEETH BITS | Good for: Hard wood ,MDF,Composite board,Shaving board and so on. | Φ3.175,Φ4,Φ6,Φ10 |
 |
TWO FLUTE P&DOWN CUT DOUBLE FLUTES SPIRAL BITS | Good for: MDF, PVC, Board with lagging, log. | Φ3.175,Φ4,Φ6,Φ10 |
 |
ONE STRAIGHT FLUTE BITS | Good for: Multilayer board, Plywood, MDF, Foam,Plastic and so on | Φ3.175,Φ4,Φ6,Φ10 |
 |
DOWN CUT DOUBLE FLUTES SPIRAL BITS | Good for: MDF, Multilayer board, Plywood. | Φ3.175,Φ4,Φ6,Φ10 |